English
Views: 0 Author: Site Editor Publish Time: 2024-12-13 Origin: Site
Pay attention to the following points when installing hot melt glue gun and hot melt tube:
1. When installing the hot melt glue tube, you need to adjust the pressure value of the regulator to zero.
2. When moving to install the hot melt glue gun, be sure to protect the nozzle.
3. Connect the hot melt glue gun to the hot melt glue tube, the hot melt glue tube is connected to the hot melt glue machine main unit before switching on the power. (Pay attention to the connection of the screw teeth should be right, to prevent slipping teeth)
4. The solenoid valve is close to the position of the nozzle to avoid causing the switching time to be prolonged.
5. The hot melt adhesive tube can be hung up during use to avoid wear and tear on the ground movement. Especially manual hot melt adhesive machine, basically hanging, both to protect the hot melt adhesive tube, but also to save energy.
Installation of hot melt glue machine equipment must pay attention to these small details, I hope to help you.
